Woodward Concrete Cutting & Demolition, call 801 721 7110 (801) 721-7110

Woodward Concrete Cutting · Layton, UT

Concrete Cutting in Layton and Across Northern Utah

When you need existing concrete cut, we bring the saws to your site and cut straight to the line. We flat saw and slab saw floors, driveways, patios, sidewalks, roads, highways, and parking lots, and we cut control joints and trench lines for utilities. Every cut is made to the marked depth with dust and slurry control, so the slab you're keeping stays sound and the section you're removing comes out clean. Brady and our crew work for homeowners and contractors alike, on jobs big and small. Call or text for a free estimate.

Call (801) 721-7110 Free quote

What's included

Concrete Cutting, done the right way.

  • We flat saw and slab saw floors, driveways, patios, sidewalks, roads, highways, and parking lots, straight to your marked line and depth.
  • We saw control joints into slabs so cracking follows the line you want instead of wandering across the surface.
  • We cut a clean, square section out of a slab so it can be lifted out and replaced.
  • We saw trench lines through concrete for plumbing, electrical, and other utility runs, leaving clean edges to backfill against.
  • We cut curbs for a new driveway approach and cut through reinforced concrete and rebar without chewing up the slab around it.
Call (801) 721-7110
A walk behind concrete saw and water rig on a job across the Wasatch Front

Why a sawn cut beats breaking it

A clean saw cut protects the concrete you're keeping. When you break concrete out with a hammer instead of sawing the line first, the damage runs past where you wanted it and leaves cracked, ragged edges that keep spreading once our freeze and thaw winters and shifting Utah soil get to work on them. Sawing to the marked depth gives you a straight, square edge that holds up, whether you're patching a slab or opening a trench. We run water and slurry control on every cut to keep the dust down, keep your site clean, and stay inside OSHA silica rules.

Common jobs

What people call us to cut

Here are the flat and slab sawing jobs folks around Northern Utah call us for most.

  • Cutting a clean section out of a driveway or garage floor so it can be lifted and replaced
  • Sawing control joints into a slab so it cracks on the line instead of at random
  • Trench cuts through concrete for a new water, sewer, or electrical run
  • Curb cutting for a new driveway approach off the street
  • Cutting out a chunk of a front walkway or patio that needs to go
  • Slab and road sawing for contractors on commercial and municipal sites

How it works

How a cutting job goes.

01

You call and we price it

Tell us what you need cut and where. Send a couple photos or a quick text if that's easier. We'll get you a free estimate fast, usually with a real number you can count on.

02

We mark and cut to the line

On site, we confirm the layout, set our depth, and run water and slurry control. Then we cut straight to your marked line so the edges are square and the concrete you're keeping stays sound.

03

We break it free and clean up

If the piece is coming out, we break it loose and haul the debris away. You're left with a clean, square opening that's ready for the next step, whether that's a patch, a pour by your crew, or a finished trench.

The honest place to start

Start with a free estimate.

Tell us what you need cut, drilled, or removed, and we'll come out, look at the concrete, and give you a straight price. No cost and no pressure. Call or text to set it up.

Call (801) 721-7110 (801) 721-7110

Good to know

Concrete Cutting questions, answered.

How much does concrete cutting cost?
It depends on how thick the concrete is, how many feet you need cut, and how easy the site is to reach, so we give you a real number up front. Estimates are free, and folks tell us all the time that our price came in the fairest of everyone they called. We can often bid a straightforward job right from a few photos or a quick text.
Do you work for homeowners or just contractors?
Both. We cut for homeowners doing a single driveway or patch, and we cut for builders, plumbers, and general contractors who need us on site the day they said. We'll make time for small jobs too, not just the big ones.
Can you cut through rebar and reinforced concrete?
Yes. Our saws are built to cut straight through rebar, mesh, and heavily reinforced slabs. You get the same clean, square cut to the marked depth whether the concrete is plain or loaded with steel.
How deep can you cut a slab?
Our walk behind flat saws handle typical slab, driveway, and roadway thicknesses in a pass or two. Tell us the depth you need and we set the blade to hit it and cut straight to your line. If a job needs deeper vertical work, we've got wall and wire sawing for that too.
Will cutting make a big mess in my house or shop?
We keep it clean. We run water and slurry control on our cuts, which knocks the dust way down, keeps your floor and site tidy, and meets the OSHA rules for silica. Indoor floor cuts are something we do regularly.
Can you cut a section out so it can be replaced?
That's a common one. We saw a clean, square section out of the slab, break it free, and haul it off so the spot is ready for you or your contractor to fill back in. Straight edges make the patch sit right and hold better.
How soon can you come cut my concrete?
Usually fast. We're quick to answer, quick to get you a price, and we come out on short notice when we can, including jobs where somebody's schedule is riding on it. Call or text and we'll tell you honestly when we can be there.

More of what we do

Wall and Wire SawingCore DrillingDemolition and Removal

Free quote

Ready to get started?

Tell us about your project and we'll call or text you back with an honest written price. Every estimate is free, with no pressure.

Call (801) 721-7110 Send your project

Mon to Fri, 6am to 5pm

Call Free quote